Tag Archives: chimney inspection

Levels of Chimney Inspections

A microscope on top of a cut-out house with the focus on the chimney

In 2000, the National Fire Protection Agency, otherwise known as NFPA, addressed chimney inspections. The NFPA established three levels of inspection–Level 1, Level 2 and Level 3. This three-tiered system of chimney inspections can be confusing to homeowners, real estate agents, and even home inspectors. This is a brief explanation to clarify this important subject.

Home inspections

Home inspectors perform an inspection on most all of the systems in a home. However, they will be the first ones to say that they cannot thoroughly inspect a chimney because they can only inspect what they can see.

Home inspectors can inspect the firebox (where you make the fire) and they can inspect the top of the chimney (if they get on a roof), but home inspectors cannot inspect the most critical part of the chimney system–the flue lining.

Most chimneys built after the 1940s have a flue lining. For the most part, this lining is made out of terra cotta (clay), pumice or, currently, the lining is made out of metal. If this lining is damaged or non-existent, the chimney can no longer be used.

Chimneys constructed without linings are called “Unlined Chimneys.” According to the Chimney Safety Institute of America, they specifically say: “Never use a chimney that does not have a liner or has a damaged or improper lining.”

If a chimney is dirty, it’s absolutely impossible to inspect the chimney. There is no possible way to see through a thick layer of creosote build-up to inspect the flue lining for cracks or missing mortar joints. In this case, the chimney must be swept first before doing any inspection. Home inspectors don’t sweep chimneys which is yet another reason why home inspectors cannot completely inspect the chimney.

For this reason, most home inspectors and real estate professionals will recommend a more thorough chimney inspection be done by a CSIA Certified Chimney Sweep.

The difference between the levels of inspection varies between how in-depth the inspection is, which areas are to be inspected, what types of tools are used to access various parts of the chimney and to what degree of invasiveness. Here is a quick breakdown of the Levels of Chimney Inspections:

Level 1 Chimney Inspections

This is a typical inspection done annually as part of routine chimney maintenance. In most situations where there have been no changes in usage or fuel type during the recent past or there have been no major performance problems, then Level 1 Chimney Inspections are sufficient. Inspecting the top of the chimney from the roof or ladder is not part of Level 1 Chimney Inspections. We also make sure that the proper clearances to combustibles are within code in accessible locations.

Level 2 Chimney Inspections

This level of inspection is recommended for:
* When there has been a change of fuel type (such as going from wood burning to gas log burning)
* When relining a chimney or installing an appliance such as a stove insert
* Upon sale or transfer of the property during a real estate transaction
* After a malfunction or chimney fire event
* After an external event such as an earthquake or major weather event

Level 2 chimney inspections are much more in-depth than Level 1 chimney inspections. Most chimney professionals will use a video camera to see all parts of the flue lining. These video inspections will allow us to see aspects of the chimney that Level 1 chimney inspections cannot. Specifically, we’re looking for cracks in the flue lining or missing mortar joints between the flue tiles. In addition to the video scans of the flue lining, these Level 2 Chimney Inspections also may include accessible portions of the chimney’s exterior, as well as attics, crawl spaces and basements.

If a chimney has not been used in a long time, it’s common to have spider webs. In this case, these spider webs will show up as cracks during a Level 2 inspection with a video scan. The spider webs can sometimes give us a false reading and may show cracks when there are no cracks. For that reason, we likely will recommend a chimney sweeping as part of Level 2 chimney inspections.

Level 3 Chimney Inspections

Level 3 Chimney Inspections are rare and are recommended only when Level 1 or Level 2 chimney inspections are not sufficient to determine the serviceability of the chimney. These Level 3 chimney inspections include all aspects of Level 1 and Level 2 chimney inspections but may also include dismantling parts of the system or cutting into walls in order to gain access for areas of the chimney not accessible by other methods.


This NFPA standard, with the three Levels of Inspection, is for the benefit of the homeowner. A CSIA Certified Chimney Sweep will be able to determine and recommend which level of chimney inspection is needed for the situation.

And remember, the National Fire Protection Association and the Chimney Safety Institute of America recommend that all chimneys be inspected annually and swept if necessary. To find a qualified CSIA Certified chimney professional in your area, be sure to go through the Chimney Safety Institute of America.

Here is further information on the Levels of Inspection. [Video credit: Chimney Safety Institute of America]

Close-up of the face of a sheep

Timing is Everything – Don’t be a Chimney Sheep!

Close-up of the face of a sheep
Don’t be a chimney sheep!

Sheep are best known for flocking and will run together as herds because there’s safety in numbers. This works great for sheep but works against homeowners for their home maintenance, especially in preventing fire hazards due to chimneys and fireplaces.

It’s common knowledge that you never call for maintenance on your air conditioning on the hottest day of summer and you don’t even attempt to call an appliance repairman to fix your kitchen stove on Thanksgiving Day. Not only will you pay a lot more money but you will wait more than a few days before getting a service. Maintenance is best done to prevent break-downs, especially break-downs during inopportune times.

The rule of thumb for timing on any home maintenance is: DON’T BE A SHEEP! This certainly applies to any service within the chimney industry, whether this is a chimney inspection, a chimney sweeping or any chimney repairs needed.

The chimney industry is extremely seasonal and, in most parts of the United States, the busiest time of the year is from September through February. Don’t be a sheep and call a chimney professional at the first cold snap of the year. Better to maintain your chimney on a preventative basis during the off-season.

The best time of year to have your chimney inspected is after you finish using it for the last time of the year, typically in the spring. Not only will the prices be the lowest at that time of year, but you can usually schedule a chimney sweep appointment within a few days to a week. This also allows more than enough time to do any repair needed long before the fire-burning season starts up in the Autumn.

So don’t be a sheep. Get your chimney inspected, swept if needed and repaired during the off-season. That way, when you light up your fireplace for the first time in the Fall, you’ve got peace of mind and can sit back on a cozy night and thoroughly enjoy your fireplace.