Tag Archives: Dryer Vent

Dryer vent connector hose clogged with lint

What is a Dryer Vent Cleaning Kit?

With the perks of owning a home comes the responsibilities of home ownership–the long list of weekend “honey do’s.” At times, homeowners take short cuts, perhaps to save time or to save money. Many times, there are no problems with this, but on occasion, saving a dime can cost a lot of dollars. One of the tasks of home maintenance that should be left to the experts is dryer vent cleaning.

Why do you need a dryer vent cleaning?

The dryer is one of the most dangerous appliances in the home. As a Certified Dryer Exhaust Technician, I receive two to three phone calls a month from people whose dryer caught on fire.

According to a recent report from the National Fire Protection Association, the leading factor contributing to dryer fires was failure to clean the dryer vent and the inside of the dryer.

Fortunately, homeowners are becoming more educated toA dryer vent cleaning kit the dangers of dryer fires. According to the National Fire Protection Association, dryer vents should be cleaned once a year for the average family. More frequent dryer vent cleaning would also depend on the quantity of laundry you wash, how your dryer vent system is routed as well as how many pets you have with fur. Here are the signs that you need a dryer vent cleaned.

To save money from hiring a professional, some homeowners are using the dryer vent cleaning kits that you can buy from the big box hardware stores or through Amazon.

What is a dryer vent cleaning kit?

Dryer vent cleaning kits are composed of rods that are anywhere from 16″ to 24″ long as well as a four inch round brush. The kit may also include a drill bit to attach the rods to a drill for faster cleaning. The drill is not mandatory but makes the process faster, easier on the venting system, and less effort for the homeowner.

But homeowners need to know some important information before purchasing dryer vent cleaning kits.

Six problems with dryer vent cleaning kits

Here are six reasons why those DIY inexpensive dryer vent cleaning kits can result in expensive home repairs in the end.

* These kits are not intended for use with dryer vent systems with any 90 degree bends. Most dryer vent systems have multiple 90 degree bends. Although most rods in these kits are somewhat bendable and flexible, many times the rods will break or get stuck inside the vent in the attempt to go through the 90 degree bend.

* I’ve received more than a few phone calls from desperate homeowners who tried to do the dryer vent cleaning with these inferior tools and gotten the brush and rods stuck inside the system. A lot of times this happens because the homeowner reversed the drill, which detaches the rod and/or brush inside the vent. Once this happens, it is extremely difficult to retrieve the stuck brushes and rods. In many cases, the only way to resolve the issue is to tear open the wall to access the vent to remove the stuck brush and rods.

Dryer Vent Cleaning Brush Lint Remover

* Most dryer vents inside the walls are made from thin gauge galvanized metal. If a homeowner is attempting to go through a 90-degree bend with the rods, it is possible to puncture a hole in the thin metal vent. Even more important, as a result of the puncture, lint as well as condensation can get inside the wall cavity, creating a potential fire hazard and/or a mold issue. If it’s a gas dryer, gases are getting inside the wall cavity. With the puncture, the system is no longer pressurized and the venting will need to be replaced which can be very expensive.

* Many of the dryer vent cleaning kits only go a short distance, sometimes just twelve feet. Dryer vent systems are typically much longer than that so the brushes won’t go the full distance. We’ve seen situations where homeowners have gone into the system in one direction, then go in from the opposite direction, creating a blockage in the middle. They’ve now created a plugged-up system which is an even worse situation than before.

* If not done correctly, the brushes can catch at the vent pipe connections and cause a disconnection in the pipe. This may require opening up the walls to replace the pipe.

* Some dryer venting will go through the roof. This will require getting up on the roof where the vent exhausts out. Not all homeowners like to or should be on a tall ladder or roof to do the work on top.

How to find a Certified Dryer Exhaust Technician

To find a qualified dryer vent cleaning company, make sure to use a Certified Dryer Exhaust Technician. Go to the Chimney Safety Institute of America website, enter your zip code and it’ll give you a list of Certified Dryer Exhaust Technicians who service your zip code. Look for the logo for Certified Dryer Exhaust Technicians.

In conclusion….

These dryer vent cleaning kits may be useful for very short, straight dryer vents without any 90 degree bends. While I commend homeowners for trying to save money by doing their own dryer vent cleaning, if you don’t have the specific tools that professionals use plus the proper knowledge and training, you may create a very expensive repair in the end. Penny wise and a dollar foolish.

How To Avoid a Dangerous Dryer Fire

Man looking into dryerA dryer fire is much more common than you think. The National Fire Protection Association found that from 2010-2014, U.S. fire departments estimated 15,970 fires involving washers and dryers, resulted in 13 deaths, 440 injuries and $238 million in property damage. Out of all those fires, 92% were due to dryer fires.

According to the U.S. Consumer Product Safety Commission, the second most dangerous appliance in the home is the clothes dryer. The first most dangerous appliance is the kitchen stove. In most homes, the clothes dryer is used far more often than the stove.

As one of the few women Certified Dryer Exhaust Technicians in California, I speak to many people about their dryers. On average, I receive 2-3 calls a month from people who have experienced a terrifying dryer fire.

Simple, easy-to-do tips you can do to prevent a dryer fire

Lint screen•  Clean out the lint screen after every load of laundry.

•  Never use your dryer without a lint screen.

•  Always check pockets before doing your laundry. Paper products like Kleenex, cocktail napkins, shopping lists, and receipts get past the lint screen and land inside the dryer along with lint which creates the fuel for a dryer fire. These products also clog the dryer vent which makes the dryer run hotter, setting yourself up for a dangerous dryer fire.

•  If you use fabric softener in your washer or dryer sheets in the dryer, we recommend washing the lint screen every few months, using water, liquid soap, and a toothbrush. Fabric softener and dryer sheets leave a chemical film that clogs the lint screen, causing your dryer to overheat.

•  Don’t overload your dryer. This can also cause the dryer to overheat, potentially causing a dryer fire.

•  If your dryer is located in a laundry room or laundry closet, the doors to the room or closet must be open when the dryer is on. A dryer needs 100 square inches of oxygen, the equivalent of a 10″ x 10″ window. If the dryer doesn’t have this make-up air, it can overheat.

•  If you have an exhaust fan in your laundry room, keep it off while the dryer is running, especially if the laundry room or laundry closet doors are closed. The exhaust fan removes air from the room. The dryer needs that oxygen in order to ventilate properly.

Clogged dryer vent exhaust•  Never have a screen where the dryer vent exhausts out. The screen will prevent animals from entering the dryer vent but the screen plugs up easily with lint. Instead, use a dryer damper or flapper.

•  The dryer needs at least 18″ of clearance in front of it. The dryer pulls air from underneath the dryer. If a laundry basket or other objects are in front of the dryer, it makes it harder for the dryer to pull the air in, causing the dryer to overheat.

•  The flexible connector hose between the back of the dryer and the wall must be shiny aluminum, not white plastic or vinyl. Some dryer manufacturers require rigid venting behind the dryer. Check the dryer’s manufacturer’s instructions for the proper transition between the back of the dryer and the wall.

•  Don’t push the dryer too close to the wall behind it. This may kink, crush or collapse the flexible connector hose which may prevent the dryer from exhausting properly. This connector hose must be as short as possible and never longer than eight feet. It should only be long enough to go from the back of the dryer to the wall with just a little slack so that it still stays connected if you pull the dryer out.  Here’s a link to several options for dryer vent hoses for tight spaces.

Indoor Dryer Vent Kit
Photo Credit: Amazon

•  Building code requires that the dryer vent to the outside of the house. Indoor dryer vent kits do not meet that requirement and could create a potentially dangerous situation, especially for venting a gas dryer.

•  Dryer vents cannot vent into garages, attics, basements or crawl spaces. For every load of clothes you dry, the dryer vents a half of a gallon in condensation, creating a sauna in the room. This moisture can create mold in enclosed areas.

•  The dryer vent going into or through any enclosed area (garages, attics, basements or crawl spaces) must be the rigid dryer vent pipe. The flexible connector hose can only be used for the short distance between the back of the dryer and the wall, never inside an enclosed area.

•  A plugged up dryer vent will prevent carbon monoxide from venting to the outside. It will also overheat the dryer. Here are signs that you may have a plugged up dryer vent.

•  Always have an ABC-type of fire extinguisher close to or inside the laundry room in case of a dryer fire.

C-Det logo for dryer vent technicians•  Have your dryer vent cleaned once a year by a professional Certified Dryer Exhaust Technician. Most people don’t realize that it’s typically chimney sweeps who do dryer vent cleaning. This is because the chimney industry has developed the proper tools and equipment specifically for dryer vents. If the dryer vent is not cleaned correctly, the dryer vent can get disconnected inside the walls or completely plugged up, making for a very expensive repair.

•  Make sure to ask how the dryer vent cleaning professional cleans the dryer vent. Professional dryer exhaust technicians will use a brushing method to scrub the dryer vent clean from beginning to end. These brushes have rods that go through the multiple 90 degree bends that most dryer vent systems have. Many companies who are not professional will only use vacuums or air pressure that just remove the loose lint accumulation and not the caked-on, paper-mache’ buildup inside a dryer vent.

•  Professional dryer exhaust technicians also have special tools, either a Magnehelic Gage or Vane Anemometer, to measure the airflow of the dryer. After a thorough dryer vent cleaning is done, we test the pressure at the termination. If the system doesn’t have air pressure, then we know that either the dryer needs a repair or there’s a disconnected vent inside the wall. Here’s how to find a professional Certified Dryer Exhaust Technician.

Dryer fire•  Cleaning out your dryer vent is only one side of the issue. A dryer fire can also be caused by the clothes dryer itself. The paper and lint accumulation inside the dryer under the drum is typically where the dryer fire occurs. For that reason, hire a professional appliance technician to clean out the inside of the dryer once or twice a year, depending on your laundry habits. Simply cleaning the lint screen isn’t enough because the paper and lint can get past the lint screen and land inside the dryer. The only way to remove that lint is to open up the dryer.

•  The most important piece of advice I have: Never go to bed with the dryer on and don’t leave the house either!! You want to be home and you want to be awake in case of a dryer fire. This is especially true when your dryer is located in an attached garage. Building code requires a one-hour fire-rated door between the garage and the house. Your garage would be completely gone before you would even know you had a fire. In this case, it’s especially dangerous if you have a bedroom above the garage.


Cleaning out your dryer vent as well as inside the dryer itself will save you money on utility bills, create less wear and tear on the dryer, reduce expensive appliance repairs and will reduce the chance of a dryer fire.

Proper maintenance of your dryer vent, as well as your dryer, can give you peace of mind from a potential dryer fire.

Eight Problems with Indoor Dryer Vent Kits

A plugged up dryer vent can create problems during laundryAs homes are remodeled and laundry rooms are created where there wasn’t one before, contractors have had to get very creative with how to vent the dryer from the laundry room to the exterior of the home as required by building code. Sometimes it’s not possible to vent to the outside. In this case, contractors may recommend an “Indoor Dryer Vent Kit.” These kits can be easily found in hardware stores, big box stores and online.

The manufacturers of these products claim to solve the problem of venting a dryer to the exterior of the home. They also claim that Indoor Dryer Vent Kits are ideal for apartments, condominiums and RV’s.

However there are some down sides.  Here are some things you may want to take into consideration if you use this product.

How do these Indoor Dryer Vent Kits work?

The flexible dryer exhaust hose is simply routed from the back of the dryer into the reservoir of these Indoor Dryer Vent Kits. Water is placed inside the reservoir. The theory to this product is that the water acts as a filter and catches the lint. The homeowner is supposed to change out the water after every load.

Eight problem with Indoor Dryer Vent Kits

Indoor Dryer Vent Kit
Photo Credit: Amazon

1) Just because a product is sold in a big box store doesn’t mean that it meets building code. In fact, the 2016 California Mechanical code 504.4 specifically says: “Clothes dryer exhaust ducts shall (meaning required to) terminate to the outside of the building.” Many states have this same code. This means that Indoor Dryer Vent Kits are against code in California and in fact, in most other states.  Before purchasing, check your state and local mechanical codes to determine if these products are legal to use in your area.

2) For every load of laundry you dry, you are venting up to a gallon of water in condensation from your dryer. This will create a sauna in your laundry room. The water reservoir for an Indoor Dryer Vent Kit doesn’t prevent that moisture from exhausting into that room. In fact, the humidity in that room can get so bad that your walls and ceiling will be dripping with moisture. Eventually the paint will bubble and peel. The extra moisture will also ruin wood cabinets in the room. Opening up a door or window in the laundry room may not be enough to solve the excessive moisture issue.

3) This extra humidity and moisture will create mold problems in your home since the moisture is getting into the drywall and wood cabinets.

4) Lint can pass through the Indoor Dryer Vent Kit’s reservoir without going into the reservoir water which means the lint will coat your laundry room and house with a fine layer of lint. The lint doesn’t necessarily get trapped inside that water reservoir. When lint accumulates inside a room, the buildup can create a fire hazard.  And of course, it creates a mess too.

5) There have been documented complaints that the fine particulates of lint that escape from the reservoir can cause the smoke detector to go off.

6) Even more dangerous, the manufacturers of these Indoor Dryer Vent Lint Kits warn homeowners not to use this device with gas dryers.  Many homeowners either don’t realize this hazard or may not even know if they have an electric dryer or gas dryer. Venting your gas dryer inside a home is like running your car in the garage with the garage door closed.  This could prove deadly.

7) The hassle factor is huge. The manufacturers of the Indoor Dryer Vent Kits recommend to change the water inside the reservoir after every load. In reality, when we go to a house that has been using this set-up, the water hasn’t been changed for weeks or months since it’s such a nuisance to deal with.

8) Since most of us now live in airtight homes, the lint particulates migrate into the entire living area. It is then in the air you breathe. For people who have asthma or allergies, this can be a major health hazard. Why take the risk?

Solutions to dryer vent problems

If the system is routed properly, many times the very simple fix is to clean the existing dryer vent system that may have become plugged with use. Most people don’t realize that chimney sweeps  do dryer vent cleaning. They have the proper specialized dryer vent cleaning equipment that will scrub through the multiple 90 degree bends that most dryer vent systems have.

C-Det logo for dryer vent techniciansHere are the signs that you need your dryer vent cleaned.

To find a qualified Dryer Exhaust Technician in your area, go to the Chimney Safety Institute of America website and look for the technicians with the Certified Dryer Exhaust Technician logo.

In cases where the dryer vent system is disconnected or not routed properly, many times a contractor can install a dryer vent system for an affordable price.

The dryer is one of the most dangerous appliances in your home. Here are some easy tips to keep you safe while you’re using your dryer.

Don’t depend on the easy fix to take care of your dryer vent problem.  Easy is not necessarily better.

How to Avoid a Dryer Fire During a Flex Alert

Dryer fireHere we are in July and we’re all enjoying the beautiful summer weather that’s common here in beautiful San Diego, but this heat has created some unintended consequences.

Due to the extreme summer heat throughout the region and the resulting high electricity usage, the manager of the state’s power grid has issued a Flex Alert Warning for the entire state of California. As part of the Flex Alert, consumers are advised to reduce electricity use from 2:00pm until 9:00pm.

Besides raising thermostats to at least 78 degrees, consumers are being urged to avoid using major appliances until early morning or late evening. One of the appliances they specifically addressed is dryers.

According to the National Fire Protection Association, there were an estimated 15,970 fires per year due to washers and dryers in the United States between 2010 to 2014. Because of the very high incidence of a dryer fire, we highly recommend that you never go to bed with the dryer running.

I know that we all should comply with saving energy during this Flex Alert by doing our laundry late at night but it’s important to stay safe as well. I speak to several people every month who call me because of a dryer fire. Yes, it happens, and it happens often enough that we should all be aware of the dangers of going to sleep while the dryer is running.

For more information about dryer safety and how to reduce the possibility of a dryer fire, check out my blog post “18 Important Tips for Dryer Vents.”

In the meantime, enjoy your summer!

10 Signs That You Need a Dryer Vent Cleaning

Woman looking at clothes in dryerThere’s nothing more annoying for a homeowner than when the clothes dryer stops working. Laundry comes to a complete standstill and there’s no place to put the basket full of sopping wet clothes. In this case, most homeowners automatically think there’s a problem with the dryer itself and so they call the appliance repair company. After several days waiting for the repairman to show up, he takes five minutes to determine that there’s nothing wrong with the dryer at all. The dryer vent is clogged.   So now the homeowner has paid for a totally unnecessary expense for an appliance repair. As a Certified Dryer Exhaust Technician, I hear this story almost daily from frustrated homeowners who just want to get their laundry done.

Another even worse scenario that we see too often:  When your dryer takes too long to dry, you automatically think that the problem is with the dryer.  Since the dryer is a few years old, you spend the big bucks to buy a new dryer.  The new dryer is installed and, once again, takes too long to dry.  You come to the frustrating realization that you just spent unnecessary money on a new dryer while throwing away a perfectly functional dryer.  The dryer vent was the problem, not the dryer.

 So how do you tell if your dryer vent is clogged?

1)  Your clothing takes too long to dry. It should not take any longer than 45 minutes to dry an average load of laundry.

2)  The Exhaust Termination (also referred to as a “Flapper,” “Wall Cap Termination” or “Roof Termination”) where the dryer exhausts to the outside doesn’t open when the dryer is on.

3)  The dryer seems to be overly hot to the touch when the dryer is on.  Also, the laundry room feels like a sauna when the dryer is on.

Carbon monoxide detector4)  In the case of a gas dryer, the carbon monoxide detector in the laundry room sounds its obnoxious alarm. Blocked or plugged up dryer vents may allow the carbon monoxide to back up into the home since the gases cannot exhaust properly. It is highly recommended to install a carbon monoxide detector in the laundry room when you have a gas dryer.

5)  More lint than normal appears around the dryer and in the laundry room.

6)  On more sophisticated dryers, the electronic read-out will indicate that there’s an issue with the dryer vent or lint screen.

7)  You notice a burning smell when the dryer is on. This is a sign of a dryer fire inside the dryer. According to the National Fire Protection Association, between 2010-2014, the U.S. fire departments estimated that there were 15,970 fires involving washers and clothes dryers, resulting in 13 deaths, 440 injuries and $230 million in property damage.  The large majority of these fires were due to clothes dryers.

8)  The screen that surrounds the dryer exhaust termination is plugged up. Clogged dryer vent exhaustAlthough the screens are useful for keeping out rodents, the screens are actually against code because they tend to plug up with lint.

9)  Your clothes develop a musty or moldy smell.

10)  Your dryer stops working. If the dryer doesn’t vent properly, the dryer overheats and will damage expensive parts in the dryer in which case you will need an appliance repairman to fix the dryer after the dryer vent cleaning.

What NOT To Do With A Dryer Vent

Some DIY’ers choose to purchase a Dryer Vent Cleaning Kit from one of the big box home improvement stores.  However, because these kits are intended for dryer vent systems less than ten feet long and most homes have dryer vents far longer, using these kits actually creates a blockage, making it more difficult for a professional to remove the blockage.

Who do you call to clean a dryer vent?

Most appliance repair companies don’t touch dryer vents and most dryer vent professionals don’t fix dryers. To find a qualified Certified Dryer Exhaust Technician in your area, go to Chimney Safety Institute of America and look for a C-Det Certified Dryer Technician. Make sure that the technician uses a brushing method to scrub the vent clean and not just air pressure or vacuums which just removes the loose lint.

 

After the dryer vent is cleaned, you’ll be happy to get back to doing your laundry in no time!

 

 

Dryer in laundry room

18 Important Tips for Dryer Vents

Clothes dryer with basket of clothes on top of dryer

Many homeowners don’t realize just how potentially dangerous it is to do laundry. According to the National Fire Protection Association, between 2010 to 2014, there were an estimated 15,970 fires due to washers and dryers in the United States each year. Interestingly, the innocent-looking clothes dryer accounted for 92% of those fires.

These fires resulted in 13 civilian deaths, 440 civilian injuries and $238 million in property damage.

With over 20 years of experience as only one of two women Certified Dryer Exhaust Technicians in California, I know the importance of safety as it relates to dryer vents. Here are important safety-related “Do’s” and “Don’ts” to reduce the chance of dryer fires

Nine Important “Do’s” for Dryer Vents

1) When installing a new dryer, always install a new connector hose between the dryer and the wall. This hose should be a metal connector hose, either rigid or Connector hose between dryer and wallflexible. If your connector hose is white plastic or vinyl, replace it immediately since those are potential fire hazards. In the case of a flexible hose, the hose should only be long enough to go between the dryer and the wall with a little slack so that if you pull out the dryer, the hose still stays connected to the wall. The Chimney Safety Institute of America (CSIA) recommends that this connector hose never be longer than eight feet. For tight spaces behind the dryer, here is a link for options for dryer vent hoses.

2) Always clean out the lint screen before each load. Never use your dryer without the lint screen installed.

3) Using dryer sheets or dryer pads may leave a chemical film on your lint screen, which makes your dryer harder to “breathe.” If you use these products, clean your lint screen using water, liquid soap and a toothbrush every few months.

4) Keep combustible and volatile materials away from your dryer.  Paper products like toilet paper and paper towels should not be stored too close to the dryer.  In addition, flammable or volatile chemicals such as alcohol, gasoline, motor oil, finishing oils and stains, spot removers, solvents, cleaning agents and cooking oils should not be stored in the laundry room. These chemicals are not only flammable but they can also give off toxic vapors and odors.

5) Always check pockets before you do your laundry. Paper products such as receipts, note paper, or cocktail napkins will get past the lint screen and land inside the dryer under the drum where the paper becomes a fire hazard. Dryer sheets or dryer pads can also get into the vent. Sometimes this paper, along with lint which you have no control over, will get passed from the dryer into the dryer vent where it mixes with moisture from drying your clothes and becomes paper mache inside the vent pipe. This will clog up the vent, creating a potential fire hazard for your dryer.

6) Just because the dryer venting system is clean, doesn’t mean you never have to worry about dryer fires. The lint and paper accumulation inside the dryer under the drum is the fuel that creates the dryer fires. Contact an appliance repair company to periodically have the lint and paper accumulation cleaned out from the body of the dryer, under the drum.

7) Due to the high incidence of dryer fires, an ABC-type fire extinguisher located close to the dryer is highly recommended in a visible and accessible location.

8) In addition to the fire hazard associated with dryer fires, there’s also the issue of carbon monoxide poisoning. Blocked or plugged up dryer vents for gas dryers may allow carbon monoxide to back up into the home. It is highly recommended to install a carbon monoxide detector close to the dryer when you have a gas dryer.

9) Have the dryer vents professionally brushed out on a regular basis. Professionals vary as to the frequency for cleaning out the dryer vents but the CSIA recommends that the dryer vent be checked on an annual basis. Of course, your laundry habits as well as how the dryer venting system is routed will be contributing factors in the frequency of the dryer vent cleaning. To find a qualified Certified Dryer Exhaust Technician in your area, go to www.csia.org. Make sure that the technician uses a brushing method to scrub the vent clean.

Many companies will only use vacuums or air pressure which will simply remove the loose accumulation from the dryer vent which is a waste of your time and money. A professional Dryer Exhaust Technician will also use a Magnehelic Gage or Vane Anemometer to measure the air flow of the dryer vent system after the dryer vent cleaning.

Nine Important “Don’ts” for Dryer Vents

1) Don’t push the dryer too close to the wall behind the clothes dryer. The connector hose should not be kinked or crushed which will reduce air flow. Not only will this create more lint in the dryer but your dryer will run hotter than it needs to, setting you up for a dangerous dryer fire.

2) Don’t close the door to the laundry room or laundry closet when your dryer is on. According to the Uniform Mechanical Code, a dryer needs 100 square inches of “make-up air,” the equivalent of a 10″x10″ window. Without this make-up air, the dryer will run harder and hotter than it needs to. This isn’t good for the dryer and it’s not safe for you.

3) Don’t use the exhaust fan in your laundry room if the dryer is on. The exhaust fan pulls air out of the room, which makes your dryer harder to bring in the make-up air that it needs.

4) Never dry clothes that have flammable or volatile chemicals on them. Instead, dry these clothes outside.

5) Don’t overload your dryer. It makes your dryer run harder and hotter than it needs to. This will create extra wear-and-tear on your dryer as well as expensive dryer repairs, and it will reduce the lifespan of your dryer.

6) Your dryer brings in make-up air from underneath and in front of your dryer. Don’t block this area with baskets of laundry. There should be a minimum of 18″ of open area in front of your dryer.

7) Never dry rubber-backed rugs or bathroom mats or other items with foam, plastic or vinyl materials. Not only does this potentially create a fire hazard, but it’ll ruin the items due to the high heat.

8) Dryers must always vent to the exterior of the house and never into enclosed areas like garages, attics, or crawl spaces.  Never use the indoor dryer vent box kits purchased from the big box stores. These are not to code and can be especially dangerous if you’re venting a gas dryer.

9) Lastly and most importantly, NEVER run your dryer if you’re not at home or if you’re asleep.  I receive several phone calls a month from people whose dryer caught on fire.  You want to be home AND awake in case it does.

Following these tips will reduce the chance of dangerous dryer fires and will keep you worry-free while doing your laundry!